Oracle10g安装以前检查先决条件"Microsoft LoopBack Adapter配置为系统的主网络适配器"的问题解决
问题解决 2009-09-26 15:32 阅读229 评论0
字号: 大大 中中 小小
很早以前就装过,好像也遇到过类似问题,当时没管他,直接点下一步了,这次得认真点了,不然以后因为安装的问题惹麻烦就不值得了。
安装时,提示
正在检查网络配置需求... 检查完成。此次检查的总体结果为: 未执行 <<<<
建议案: Oracle 支持在具有 DHCP 分配的 IP 地址的系统上进行安装。但在安装之前, 必须将 Microsoft LoopBack Adapter 配置为系统的主网络适配器。有关在配置有 DHCP 的系统上安装软件的详细信息, 请参阅 Installation Guide。
原因,我的机器IP是自动获取的,即IP是路由器使用DHCP动态分配的。
下面找到的解决方案
安装oracle10g前,控制面板-添加硬件-选“是,我已经连接了此设备”点击下一步-在列表中选择添加新的硬件设备-选“安装我充从手动。。。”-接下来的列表中选择 “Microsoft loopback adapter ” 并将此网络连接设置为固定IP如 192.168.0.xxx,完事儿了再安装oracle 10g。
这时出现一个假的本地连接,不停的在获取IP,其实没用,只是能让racle通过检验(具体为什么我也在找,可是没有满意回答的话贴出来),设置一个固定的ip,哈哈,去监测吧,保证通过!!
下面英文的是微软官方的XP下安装Microsoft Loopback adapter的文档,请大家参阅。
引自:http://support.microsoft.com/default.aspx?scid=kb;en-us;839013
*\
How to install the Microsoft Loopback adapter in Windows XP
SUMMARY
The Microsoft Loopback adapter is a testing tool for a virtual network environment where network access is not available. Also, you must use the Loopback adapter if there are conflicts with a network adapter or with a network adapter driver. You can bind network clients, protocols, and other network configuration items to the Loopback adapter, and you can install the network adapter driver or network adapter later while retaining the network configuration information. You can also install the Loopback adapter during the unattended installation process.
Back to the top
Manual installation
To manually install the Microsoft Loopback adapter in Windows XP, follow these steps: 1. Click Start, and then click Control Panel.
2. If you are in Classic view, click Switch to Category View under Control Panel in the left pane.
3. Double-click Printers and Other Hardware, and then click Next.
4. Under See Also in the left pane, click Add Hardware,and then click Next.
5. Click Yes, I have already connected the hardware, and then click Next.
6. At the bottom of the list, click Add a new hardware device, and then click Next.
7. Click Install the hardware that I manually select from a list, and then click Next.
8. Click Network adapters, and then click Next.
9. In the Manufacturer box, click Microsoft.
10. In the Network Adapter box, click Microsoft Loopback Adapter, and then click Next.
11. Click Finish.
After the adapter is installed successfully, you can manually configure its options, as with any other adapter. If the TCP/IP properties are configured to use DHCP, the adapter will eventually use an autonet address (169.254.x.x/16) because the adapter is not actually connected to any physical media.
Note By default, TCP/IP properties are configured to use DHCP.
/**
附上无人值守安装的方法,有兴趣玩玩,我没测试啊~
*/
Unattended installation
To install the Microsoft Loopback adapter, use the following sample Unattend.txt file as a model for your Unattend.txt file: [NetAdapters]
Adapter01=Params.Adapter01
[Params.Adapter01]
InfID="*msloop"
; Microsoft Loopback Adapter
ConnectionName ="MS Loopback Adapter"
[NetProtocols]
MS_TCPIP=Params.MS_TCPIP
; TCP/IP parameters
; Use parameter values specific to your network
[Params.MS_TCPIP]
AdapterSections=params.TCPIP.Adapter01
DNS=yes
DNSSuffixSearchOrder=mycorp.com
EnableLMHosts=No
; Adapter Specific TCP/IP parameters
; Use parameter values specific to your network
[params.TCPIP.Adapter01]
SpecificTo=Adapter01
DNSDomain=mycorp.com
DNSServerSearchOrder=192.168.5.251
WINS=no
DHCP=no
IPAddress=192.168.5.10
SubnetMask=255.255.255.0
DefaultGateway=192.168.5.254
分享到:
相关推荐
Microsoft_LoopBack_Adapter_配置为系统的主网络适配器问题解决办法
Oracle 11g 安装之网络适配器要求 Microsoft Loopback Adapter (环回适配器)
Microsoft_LoopBack_Adapter_配置为系统的主网络适配器问题解决办法
但在安装之前, 必须将 Microsoft LoopBack Adapter 配置为系统的主网络适配器。有关在配置有 DHCP 的系统上安装软件的详细信息, 请参阅 Installation Guide。解决:到控制面板/添加硬件,在向导中选择“是,已经连接...
先前修改过一版XP下虚拟网卡。最近同事要在64位win7下使用虚拟网卡,原来的32位网卡已经不能使用。故修改此64位网卡驱动,以便解除微软网卡只能修改为02开头网卡MAC地址限制。
microsoft loopback adapter没有配置
在Windows7下不能成功安装Oracle,究其原因无非是因为通过不了...端不支持版本号为6.1的Windows 7操作系统”,或是“没有将 Microsoft LoopBack Adapter 配置为系统的主网络适配器”,针对 这两种情况,一一予以解答。
VPCWin 7添加Loopback Adapter的方法.doc
如何在 Windows XP 中安装 Microsoft 环回适配器
主要是因为ORACLE安装的先决条件里操作系统版本不符合,但是这个问题可以修改refhost.xml解决, 具体是在refhost.xml中添加 <!--Microsoft Windows 7--> 安装成功,方法如下: 1.在设备管理器中...
我的电脑——》属性——》设备管理——》网络适配器(选中)——》操作——》添加临时...——》——》选择MicroSoft Loopback Adapter ——》安装——完成。
该模块用于安装和卸载Microsoft Loopback网络适配器。 它使用下载名为的软件包。 该软件包包含Windows设备控制台(devcon)的32位和64位版本,可用于安装Microsoft回送网络适配器设备。 如果未安装Chocolatey,它将...
WINDOWS 2008配置LOOPBack
今天遇到一个奇怪的网络问题,记录一下研究过程和一些配置情况,顺便学习一下 Linux 下网络环境配置。 网络配置文件 该文件配置网卡信息 vi /etc/network/interfaces auto lo iface lo inet loopback # 配置 eth0...
npcap单机循环网卡插件,非常好用,解决有限资源下的网络验证
网络工程师考试中关于网络的loopback接口的作用
loopback连接oracle数据的步骤总结
借助易于使用的基于有线的界面,Loopback可以在您的计算机内部为您提供高端录音室调音台的功能! 合并音频源 将来自多个来源的音频整合到一个虚拟设备中!只需将要包括的应用程序和物理音频设备添加到“源”列...
AX1通过网络与评估板和TCP/IP协议连接,首先,TCP/IP协议发送可选的包或者文件到评估板,其次,它检查返回的数据包或者文件,发送包或者文件。最后,测量发送和接收速度。 AX1的功能如下: 测试TCP协议 测试UDP...
对 UARTLoopback 的代码进行了改进